CANARINA:
DESCAR:
INPUT DATA:
ALGORITHMS:
POLLUTANTS:
DATA II · software · chemical contamination of water
Modifying data as time progresses:
Some discharge data can vary with time (velocity of the current, pollutant concentration,...). Taking this into account, the program can do temporal averages in the calculation. In the DESCAR software, these data are allowed to vary with time.
Variables that can be modified as time progresses:
Current velocity (m/s)
Current angle (degrees)
Effluent velocity (m/s)
Pollutant concentration (g/m^3)
Discharge flow rate (m^3/s)
Variables that can not be modified as time progresses:
Buoyant Jet model / Stratified model
Water density (kg/m^3)
Stratification coefficient (1/s^2)
Water is stratified / Water is not stratified
Water depth at discharge location (m)
Discharge density (kg/m^3)
Pipe angle (degrees)
Diffuser length (m)
1/T90 (1/hours)
Discharge conditions
Number of openings
software · chemical contamination of water
chemical contamination of water
DESCAR software: water discharge system mixing zone model waste water discharge standards wastewater treatment chemical contamination of water wastewater simulation water analysis sewage treatment effluent effluent and environment sewage discharge modeling environment management and protection environmental impact evaluation environmental science · engineering environmental audit reports marine pollution monitoring sewage treatment discharge marine pollution pollution and water environmental sewage water pollution control oil environmental impact GIS · environment